Product Selection Guide
Match the application to the material. Every product below is listed with its key mechanical value and the standard it is tested to, so the choice can be checked rather than assumed.
1. Choose by application
| Application | Recommended product | Key value | Standard | Why this one |
|---|---|---|---|---|
| Bridge bearing installation | H60 Bearing Grouting Material | β₯60 MPa (25β curing) | JC/T 986-2018 | High-flow, non-shrink grout for bearing seats and structural support |
| Equipment and machine bases | High Strength Non-Shrink Grouting Material | 1d β₯20 MPa / 3d β₯40 MPa / 28d β₯60 MPa | GB/T 50448-2015 | Load transfer under base plates and anchor bolts |
| Precast concrete connections | Sleeve Grouting Material | β₯85 MPa | JG/T 408-2019 | Rebar splicing in sleeves, tested to JG/T 408 |
| Wind turbine foundations | Wind Turbine Foundation Grouting Material | >100 MPa | GB/T 50448β2015 | Tower-to-foundation connections, onshore and offshore |
| Tunnel vault and backfill | Tunnel Vault Grouting Material | β₯60 MPa | GB/T 50448β2015 | Void filling and lining contact grouting |
| Prestressed duct grouting | Prestressed Duct Grouting Material | 3d β₯20 MPa / 7d β₯40 MPa / 28d β₯50 MPa | JTG/T F50-2011 | Duct filling with low bleed and volume stability |
| Underwater repair | Underwater Non-Dispersible Grouting Material | 50β90 MPa (depending on class) | GB/T 50448β2015 | Non-dispersible grout placed in water |
| Cement pavement repair | Cement Pavement Repair Material | 1d β₯25 MPa / 3d β₯40 MPa / 28d β₯50 MPa | JT/T 1124-2017 | Rapid opening to traffic, thin-layer patching |
| Rebar anchoring / planting | Rebar Anchoring Material | 3d β₯30 MPa / 7d β₯40 MPa / 28d β₯50 MPa | GB 50728β2011 | Adhesive or cementitious anchorage in concrete |
| Explosion-proof / special floors | Explosion-Proof Concrete | >140 MPa | GB/T 39147-2020 | Anti-static and spark-resistant industrial floors |
| Waterproofing and insulation | Polymer Cement Waterproof Mortar | β₯24.0 MPa | JC/T 984β2011 | Wet areas, basements and exterior insulation systems |
2. Product quick reference
Grouting materials
| Product | Key indicator | Value | Standard |
|---|---|---|---|
| H60 Bearing Grouting Material | Compressive Strength (28 Days) | β₯60 MPa (25β curing) | JC/T 986-2018 |
| Cement Pavement Repair Material | Compressive Strength | 1d β₯25 MPa / 3d β₯40 MPa / 28d β₯50 MPa | JT/T 1124-2017 |
| Explosion-Proof Concrete | Compressive Strength (28 Days) | >140 MPa | GB/T 39147-2020 |
| High Strength Non-Shrink Grouting Material | Compressive Strength | 1d β₯20 MPa / 3d β₯40 MPa / 28d β₯60 MPa | GB/T 50448-2015 |
| Prestressed Duct Grouting Material | Compressive Strength | 3d β₯20 MPa / 7d β₯40 MPa / 28d β₯50 MPa | JTG/T F50-2011 |
| Rebar Anchoring Material | Compressive Strength | 3d β₯30 MPa / 7d β₯40 MPa / 28d β₯50 MPa | GB 50728β2011 |
| Sleeve Grouting Material | Compressive Strength (28d) | β₯85 MPa | JG/T 408-2019 |
| Tunnel Vault Grouting Material | Compressive Strength (28d) | β₯60 MPa | GB/T 50448β2015 |
| Underwater Non-Dispersible Grouting Material | Compressive Strength (28d) | 50β90 MPa (depending on class) | GB/T 50448β2015 |
| Wind Turbine Foundation Grouting Material | Compressive Strength (28d) | >100 MPa | GB/T 50448β2015 |
Speciality cements
| Product | Key indicator | Value | Standard |
|---|---|---|---|
| Acid Resistant Cement | Compressive Strength (28d) | β₯43.4 MPa | GB/T 23456β2018 |
| Aluminate Cement | 24h Compressive Strength | 50β75 MPa | GB/T 201-2015 |
| Colored Cement | Compressive Strength (28d) | β₯42.5 MPa | GB/T 175-2023 |
| Low Heat Expansion Cement | Compressive Strength | β₯32.5 MPa | GB 2938β2008 |
| Ordinary Portland Cement | Compressive Strength (28d) | 49.3 MPa | GB 175β2023 |
| Rapid Hardening Sulphoaluminate Cement | 28d Compressive Strength | β₯45.0 MPa | GB/T 20472β2006 |
| White Portland Cement | Compressive Strength (28d) | β₯42.5 MPa | GB/T 2015β2017 |
Polymer mortars
| Product | Key indicator | Value | Standard |
|---|---|---|---|
| AAC Block Masonry Mortar | Compressive Strength | β₯5.0 MPa (depending on grade) | JC/T 890-2017 |
| Anti-Static Cement Mortar | Compressive Strength (28d) | β₯25.0 MPa | SJ/T 11294β2018 |
| Barium Sulfate Radiation Shielding Mortar | Cube Compressive Strength (28d) | β₯20.0 MPa | JC/T 2676β2022 |
| Colored Cement Self-Leveling Mortar | Compressive Strength (28d) | β₯42.5 MPa | GB/T 1346 |
| Polymer Cement Waterproof Mortar | Compressive Strength (28d) | β₯24.0 MPa | JC/T 984β2011 |
| Theme Park Sculpture Mortar | Compressive Strength (28d) | β₯25.0 MPa | JGJ/T 70β2009 |
| Thermal Insulation Mortar | Compressive Strength | β₯0.50 MPa | GB/T 20473β2021 |
3. Five-step selection process
- 1Define the service condition
Load type (static, dynamic, fatigue), temperature range, wet or dry exposure, and whether the grout is placed in a confined space.
- 2Set the strength requirement at the commissioning age
A grout reaching 80 MPa at 28 days may still be unsuitable if the equipment must run at 3 days. Specify the age, not just the number.
- 3Match flowability to the placement method
Thin layers and long flow paths need higher flow; large volumes and deep pours need a mix that does not segregate.
- 4Confirm the standard and test report
Chinese cementitious grouts are commonly tested to GB/T 50448-2015; sleeve grouting to JG/T 408-2019. Ask for a batch test report.
- 5Run a trial batch for critical work
For anchor bolts, bearings and turbine connections, place a trial section and verify flow, set time and strength before the main pour.
Need help with a specific condition?
Send the load, temperature and placement details and we will recommend a mix and test plan.